Scaffolding clamps 48.3 mm (1½")
Rotary coupling B metric, 48.3 mm, SW 22 mm (fine thread)
CHF 11.70*
Application:
Rotary couplings are used as a rotating connection between two scaffolding tubes. The angle between the two tubes can be freely selected. It is important to use only certified couplers to ensure reliable safety and compliance with approval standards. Scaffolding swivel couplers are so popular because they are highly versatile. On most scaffolds, there is a need, for example, to attach scaffolding tubes as supplementary guardrails. The swivel scaffolding clamp is also very popular when used to secure diagonals that are too long.
Material, properties and features:
· Steel, drop-forged, hot-dip galvanised, robust design, ribbed
· Quick-connect thread for super-fast assembly
· Test mark in accordance with EN 74
· With hot-dip galvanised nut, 19 or 22 mm spanner size
· Nut and hammer-head bolt hot-dip galvanised for perfect durability
· Approved as a single coupling for a load of 9.1 kN
· Tightening torque for nuts: 50 Nm.
· With B certificate, for pipe diameter 48.3 mm
Product number 04961
Standard BB coupling, metric, 48.3 mm, SW 22 mm
CHF 10.25*
FV Standard couplers are used as a rigid connection between two scaffolding tubes. The angle between the two tubes is 90 degrees. It is important to use only certified couplers to ensure reliable safety and compliance with acceptance criteria. Scaffolding couplings are also frequently used for anchoring scaffolding. In this case, the scaffolding clamp is used to secure the steel tube brace (scaffolding anchor) to the scaffolding frame.
Material, properties and features:
Steel, drop-forged, hot-dip galvanised, robust design, ribbed
Quick-connect thread Test mark in accordance with EN 74
With 19 mm or 22 mm flanged nuts
Flange nut and hammer-head screw electro-galvanised
Approved as a single coupling for a load of 9.1 kN or as a double coupling for 15.2 kN
Tightening torque for the flanged nuts: 50 Nm
With BB certificate
Product number 04962
Screw-on coupling, 48.3 mm, SW 22 mm
CHF 17.70*
FVApplication
:The bolt-on coupling can be bolted to a sufficiently solid object (e.g. concrete wall, wooden beam) and then used to connect to a scaffolding tube.
Material, properties and features
:
· Steel, drop-forged, hot-dip galvanised, robust design, ribbed
· Metric thread
· Welded-in machine screw M 14 x 50 mm
· With flanged nuts, 19 or 22 mm spanner size
· Flanged nut and hammer-head screw, electro-galvanised.
Product number 00465
Half-coupling 48.3 mm, SW 22, robust design, hot-dip galvanised
CHF 7.40*
Application
:Half-couplings are finally half swivel couplings. There is a hole in the coupling base (17 mm diameter) at the swivel joint, so that the coupling can also be bolted in place using a flat-head screw.
Material, properties and features:
Steel, drop-forged, hot-dip galvanised, robust design, ribbed Metric thread or quick-connect thread (depending on batch)
Test mark in accordance with EN 74
With flanged nuts with a 19 or 22 mm spanner size
Flange nut and hammer-head bolt hot-dip galvanised
Approved as a single coupling for a load of 9.1 kN
Tightening torque of the flanged nuts 50 Nm
Additional information and notes
:This coupling is also available as separate parts with an unfinished lower section to simplify welding
Product number 00499
FV standard reducing coupling, SW 22 mm, 1450 g, 1½" x 2" (48.3 mm x 60.3 mm)
CHF 19.75*
FVApplication:
Standard couplings are used as a rigid connection between a scaffolding tube and a tube of a different diameter. The angle between the two tubes is 90 degrees. Reducing standard couplers are characterised by the fact that one side of the scaffolding clamp is optimised for the standard 48.3 mm tube, whilst the other side is designed for a different diameter.
Material, properties and features:
• Steel, drop-forged, hot-dip galvanised, robust design, ribbed
• Metric thread or quick-connect thread (depending on batch)
• Collar nut and hammer-head screw, electro-galvanised or hot-dip galvanised (depending on batch)
Additional information and notes
:
• If you require larger quantities than those shown as ‘in stock’, please contact us; we can usually assist you
• On request, we are also happy to offer further sizes for standard reducing couplings:
SW 19 for pipe Ø 48x34 mm
SW 19 for pipe Ø 48x38 mm
SW 19 for pipe Ø 48x42 mm
SW 19 for pipe Ø 48x60 mm
SW 19 for pipe Ø 48 × 76 mm
Product number ST-0009
Reducing swivel coupling, 1½" x 2" (48.3 mm x 60.3 mm), electro-galvanised
CHF 18.50*
Reducing swivel coupling, electro-galvanised steelMixed sizes 48.3 mm – 60.3 mmRemaining stock: 28 pieces
Product number 00141-G
Reducing swivel coupling, 1 1/2" x 2" (48.3 mm x 60.3 mm)
CHF 32.70*
FVApplication:Reducing swivel couplings are used as a rotatable connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes can be chosen freely. The different diameter may be smaller or larger than 48.3 mm – in this case, 60 mm.
Material, features and specifications: • Steel, drop-forged, hot-dip galvanised, robust design, ribbed
• Metric thread or quick-connect thread (depending on batch)
• With flanged nuts with a 19 or 22 mm spanner size. Flanged nut and hammer-head screw are electro-galvanised or hot-dip galvanised (depending on the batch)
Additional information and notes
:• If you require larger quantities than those shown as ‘in stock’, please contact us; we can usually assist you
• On request, we are also happy to supply reducing rotary couplings in the following combinations:
SW 19 For pipe Ø 48x34 mm
SW 19 For pipe Ø 48x38 mm
SW 19 For pipe Ø 48x42 mm
SW 19 For pipe Ø 48x60 mm
SW 19 For pipe Ø 48x76 mm
Product number 00141
Swivel coupling B, 48.3 mm, SW 22 mm, hot-dip galvanised with quick-thread screw
CHF 12.60*
Application:
Rotary couplings are used as a rotatable connection between two scaffolding tubes. The angle between the two tubes can be freely selected. It is important to use only certified couplings to ensure reliable safety and compliance with approval requirements. Scaffolding swivel couplings are so popular because they are highly versatile. On most scaffolds, there is a need, for example, to fit scaffold tubes as supplementary guardrails. The swivel scaffolding clamp is also very popular when used to secure diagonal braces that are too long.
Material, properties and features:
· Steel, drop-forged, hot-dip galvanised, robust design, ribbed
· Quick-connect thread for super-fast assembly
· Test mark in accordance with EN 74
· With hot-dip galvanised nut 19 or 22 mm spanner size
· Nut and hammer-head bolt hot-dip galvanised for perfect durability
· Approved as a single coupling for a load of 9.1 kN
· Tightening torque for nuts: 50 Nm.
· With B certificate, for pipe diameter 48.3 mm
Product number 04961Q
Reducing standard coupling, 48.3 mm x 76.1 mm
CHF 32.85*
FV Application:Standard couplings are used as a rigid connection between a scaffolding tube and a tube of a different diameter. The angle between the two tubes is 90 degrees. Reducing standard couplings are characterised by the fact that one side of the scaffolding clamp is optimised for the standard 48.3 mm tube, whilst the other side is designed for a different diameter.
Material, properties and features:• Steel, drop-forged, hot-dip galvanised, robust design, ribbed
• Metric thread or quick-connect thread (depending on batch)
• Flanged nut and hammer-head screw, electro-galvanised or hot-dip galvanised (depending on the batch)
Additional information and notes
:• If you require larger quantities than those shown as ‘in stock’, please contact us; we can usually assist you
• On request, we are also happy to offer further sizes for standard reducing couplings:
SW 19 For pipe Ø 48x34 mm
SW 19 For pipe Ø 48x38 mm
SW 19 For pipe Ø 48x42 mm
SW 19 For pipe Ø 48x60 mm
SW 19 For pipe Ø 48x76 mm
Product number 00111
Bracing coupling, 48.3 mm, SW 22 mm
CHF 17.40*
FVApplication:Bracing couplings are used to anchor scaffolding to façades or similar structures. They are secured to a scaffolding tube via the coupling claw and connected directly to an eye bolt or ring bolt at the other end. Alternatively, traditional braces can be used for anchoring. However, the version with the coupling is more flexible and also allows for unconventional anchoring points.
Material, properties and features:• Steel, drop-forged, hot-dip galvanised, robust design, ribbed
• Metric thread
• With welded-on bracing hook
• With flanged nuts with a 19 or 22 mm spanner size. Flanged nut and hammer-head screw are electro-galvanised.
• Tightening torque for the flanged nuts: 50 Nm.
Product number 00445
SCAFFGUARD half-coupler, 48.3 mm, SW 22 mm
CHF 50.40*
For the SCAFFGUARD safety system. For system-independent installation of
aluminium rails.
Product number 07211
Cross clamp 90°, 2 1/2" - 6/4" (76.1 mm - 48.3 mm)
CHF 36.00*
Minimum order quantity: 200 pieces. Delivery time: approx. 3 monthsCross clamps/standard couplers are used as a rigid connection between two scaffolding tubes. The angle between the two tubes is 90 degrees. It is important to use only certified couplers to ensure reliable safety and compliance with approval standards. Scaffolding couplers are also frequently used for anchoring scaffolding. In this case, the scaffolding clamp is used to secure the steel tube brace (scaffolding anchor) to the scaffolding frame.
Material, properties and features:
Steel, drop-forged, hot-dip galvanised, robust design, ribbed Quick-connect thread Test mark in accordance with EN 74
With 19 mm or 22 mm flanged nuts
Flange nut and hammer-head screw electro-galvanised
Approved as a single coupling for a load of 9.1 kN or as a double coupling for 15.2 kNTightening torque of the flanged nuts: 50 Nm 1920gr, FV
Product number GER061-64-f
Reducing standard coupling, 48.3 mm, x 42 mm
CHF 19.60*
FVApplication:
Standard couplings are used as a rigid connection between a scaffolding tube and a tube of a different diameter. The angle between the two tubes is 90 degrees. Reducing standard couplings are characterised by the fact that one side of the scaffolding clamp is optimised for the standard 48.3 mm tube, whilst the other side is designed for a different diameter.
Material, properties and features:
• Steel, drop-forged, hot-dip galvanised, robust design, ribbed
• Metric thread or quick-connect thread (depending on batch)
• Flanged nut and hammer-head screw, electro-galvanised or hot-dip galvanised (depending on the batch)
Additional information and notes
:
• If you require larger quantities than those shown as ‘in stock’, please contact us; we can usually assist you
• On request, we are also happy to offer further sizes for standard reducing couplings:
SW 19 For pipe Ø 48x34 mm
SW 19 For pipe Ø 48x38 mm
SW 19 For pipe Ø 48x42 mm
SW 19 For pipe Ø 48x60 mm
SW 19 For pipe Ø 48x76 mm
Product number P-0040
Reducing swivel coupling, 48.3 mm x 34 mm
CHF 31.20*
FVApplication
:Reducing swivel couplings are used as a rotatable connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes can be freely selected. The different diameter may be smaller or larger than 48.3 mm – in this case, 34 mm.
Material, properties and features
:• Steel, drop-forged, hot-dip galvanised, robust design, ribbed
• Metric thread or quick-connect thread (depending on batch)
• With flanged nuts with a 19 or 22 mm spanner size. Flanged nut and hammer-head screw are electro-galvanised or hot-dip galvanised (depending on the batch)
Additional information and notes:• If you require larger quantities than those shown as ‘in stock’, please contact us; we can usually assist you
• On request, we are also happy to supply reducing rotary couplings in the following combinations:
SW 19 For pipe Ø 48x34 mm
SW 19 For pipe Ø 48x38 mm
SW 19 For pipe Ø 48x42 mm
SW 19 For pipe Ø 48x60 mm
SW 19 For pipe Ø 48x76 mm
Product number 00138
Pipe connector with half-coupling, 48.3 mm, SW 22 mm
CHF 34.50*
Suitable for universal use. For mounting vertical frames, module stands or
Scaffolding tubes on, for example, lattice girders, triangular props, vertically running
scaffolding tubes, etc. Connection via standard scaffolding couplers and joints
via standardised pipe sockets.
Product number 00471
Reducing standard coupling, 48.3 mm x 38 mm
CHF 29.70*
FVApplication:
Standard couplings are used as a rigid connection between a scaffolding tube and a tube of a different diameter. The angle between the two tubes is 90 degrees. Reducing standard couplings are characterised by the fact that one side of the scaffolding clamp is optimised for the standard 48.3 mm tube, whilst the other side is designed for a different diameter.
Material, properties and features:
• Steel, drop-forged, hot-dip galvanised, robust design, ribbed
• Metric thread or quick-connect thread (depending on batch)
• Flanged nut and hammer-head screw, electro-galvanised or hot-dip galvanised (depending on the batch)
Additional information and notes
:
• If you require larger quantities than those shown as ‘in stock’, please contact us; we can usually assist you
• On request, we are also happy to offer further sizes for standard reducing couplings:
SW 19 For pipe Ø 48x34 mm
SW 19 For pipe Ø 48x38 mm
SW 19 For pipe Ø 48x42 mm
SW 19 For pipe Ø 48x60 mm
SW 19 For pipe Ø 48x76 mm
Product number 00107
Beam coupling 48.3 mm, 22 mm
CHF 21.90*
FVApplication
:The beam coupler is a half-coupler with a welded-on steel angle, designed for suspending scaffolding tubes from steel structures (T-beams, double-T-beams, I-beams, etc.).
Material, properties and features
:• Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch)
• With flanged nuts with a 19 or 22 mm spanner size. Flanged nut and hammer-head screw are electro-galvanised or hot-dip galvanised.
Additional information and notes:
• 9 kN permissible slip load • To be fitted in pairs
• Tightening torque for the flanged nut: 50 Nm
Product number 00454
Wall-ceiling coupler 48.3 mm, SW 22 mm
CHF 63.00*
FV
Application:
The wall-to-ceiling coupler is a universally applicable fastening element for all scaffolding components with a tube diameter of 48.3 mm. This coupler can be used to secure both non-system scaffolding tubes and lattice girders, as well as frame or modular scaffolding uprights, to load-bearing structures or buildings.
The WD coupling always allows for flexible fixing – ideal where space is limited. It is also extremely robust. It can accommodate loads both in the direction of the pipe axis and perpendicular to it. The WD coupling can be subjected to both tensile and compressive loads. Its angled design allows for installation with the head facing outwards or with the flange side facing the wall.
Material, properties and features:
· Steel, drop-forged, hot-dip galvanised, robust design, ribbed
· Metric thread
· With collar nuts, 19 or 22 mm spanner size
· Collar nut and hammer-head screw electro-galvanised
· Dimensions: 100 x 109 x 150 mm
· Max. sliding load +/- 9.09 kN; resulting anchor load at max. load:
D = Z = 16.00 kN, V = 6.5 kN in reinforced concrete
· Max. head pull-out load +/- 17 kN; resulting anchor load: 8.5 kN
· Weight: 4.4 kg
Product number 07214
Tilt-pin coupling, 48.3 mm, SW 22 mm
CHF 16.50*
FVApplication
:A tilt-pin coupling can be used to flexibly attach scaffolding components with a tilt-pin receptacle (hole for the tilt pin). It positions the tilt pin at the desired location.
MMaterial, properties and features:• Steel, drop-forged, hot-dip galvanised, robust design, ribbed
• Metric thread
• With welded-on tilt pin
• With flanged nuts with a 19 or 22 mm spanner size. Flanged nut and hammer-head screw are electro-galvanised.
• Tightening torque for the flanged nuts 50 Nm.
Product number 00448
Square tube coupler, swivel, 48.3 mm, SW 22 mm
CHF 34.50*
FVApplication
:The square timber coupler is used to connect a square timber to a scaffolding tube. The coupler can be rotated 360 degrees around the central axis on the angle bracket. The steel angle has leg dimensions of 8 or 10 cm. The entire component is hot-dip galvanised.
Material, properties and features
• Steel, drop-forged, hot-dip galvanised, robust design, ribbed
• Metric thread or quick-connect thread (depending on batch)
• With flanged nuts with a 19 or 22 mm spanner size. Flanged nut and hammer-head screw are electro-galvanised.
• The coupling is optimised for pipes with a diameter of 48.3 mm and can withstand loads of up to 0.9 kN
Product number 00451
Parallel coupling, 48.3 mm, SW 22 mm
CHF 32.70*
FVApplication
:The parallel coupler is used to connect different system uprights to one another or non-system scaffolding tubes in a force-fit manner in a parallel direction, taking into account the design-related conditions.
Material, properties and features:
· Steel, drop-forged, hot-dip galvanised, robust design, ribbed
· Metric thread or quick-thread (depending on batch)
· With flanged nuts with a 19 or 22 mm spanner size. Flanged nut and hammer-head screw are electro-galvanised.
Additional information and notes:
Centre-to-centre distance: 180 mm
Product number 01512
Reducing swivel coupling, 48.3 mm x 76.1 mm
CHF 33.45*
FV Application
:Reducing swivel couplings are used as a rotating connection between a scaffolding tube and a tube of a different diameter. The angle between the two tubes can be selected freely. The different diameter may be smaller or larger than 48.3 mm – in this case, 76 mm.
Material, properties and features
:• Steel, drop-forged, hot-dip galvanised, robust design, ribbed
• Metric thread or quick-connect thread (depending on batch)
• With flanged nuts with a 19 or 22 mm spanner size. Flanged nut and hammer-head screw are electro-galvanised or hot-dip galvanised (depending on the batch)
Additional information and notes
:• If you require larger quantities than those shown as ‘in stock’, please contact us; we can usually assist you
• On request, we are also happy to supply reducing rotary couplings in the following combinations:
SW 19 For pipe Ø 48x34 mm
SW 19 For pipe Ø 48x38 mm
SW 19 For pipe Ø 48x42 mm
SW 19 For pipe Ø 48x60 mm
SW 19 For pipe Ø 48x76 mm
Product number 00142
Tension coupling – metric, 48.3 mm, SW 22 mm
CHF 14.85*
FVApplication: A pull-type coupler is, so to speak, a clamp that connects two scaffolding tubes to act as an extension. By using such a scaffolding coupler, one tube can be placed on top of another. With this type of ‘extension’, the two tubes must also be connected using a tube coupler (item no. 00377) to stabilise the joint.
Material, properties and features
:
· Steel, drop-forged, hot-dip galvanised, robust design, ribbed
· Metric thread
· Test mark in accordance with EN 74
· With flanged nuts, 19 or 22 mm spanner size
· Flanged nut and hammer-head screw electro-galvanised
· Rated for a load of 6.1 kN.
· Tightening torque of the flanged nuts: 50 Nm.
Product number 00492
Reducing swivel coupling, 48.3 mm x 38 mm
CHF 31.80*
FVApplication
:Reducing swivel couplings are used as a rotatable connection between a scaffolding tube and a tube with a different diameter. The angle between the two tubes can be chosen freely. The different diameter may be smaller or larger than 48.3 mm – in this case, 38 mm.
Material, properties and features
:• Steel, drop-forged, hot-dip galvanised, robust design, ribbed
• Metric thread or quick-connect thread (depending on batch)
• With flanged nuts with a 19 or 22 mm spanner size. Flanged nut and hammer-head screw are electro-galvanised or hot-dip galvanised (depending on the batch)
Additional information and notes
:• If you require larger quantities than those shown as ‘in stock’, please contact us; we can usually assist you
• On request, we are also happy to supply reducing rotary couplings in the following combinations:
SW 19 For pipe Ø 48x34 mm
SW 19 For pipe Ø 48x38 mm
SW 19 For pipe Ø 48x42 mm
SW 19 For pipe Ø 48x60 mm
SW 19 For pipe Ø 48x76 mm
Product number 00139
