Scaffolding clamps 48.3 mm (1½")

For the SCAFFGUARD safety system. For system-independent installation of aluminium rails.

Minimum order quantity: 200 pieces. Delivery time: approx. 3 monthsCross clamps/standard couplers are used as a rigid connection between two scaffolding tubes. The angle between the two tubes is 90 degrees. It is important to use only certified couplers to ensure reliable safety and compliance with approval standards. Scaffolding couplers are also frequently used for anchoring scaffolding. In this case, the scaffolding clamp is used to secure the steel tube brace (scaffolding anchor) to the scaffolding frame. Material, properties and features: Steel, drop-forged, hot-dip galvanised, robust design, ribbed Quick-connect thread Test mark in accordance with EN 74 With 19 mm or 22 mm flanged nuts Flange nut and hammer-head screw electro-galvanised Approved as a single coupling for a load of 9.1 kN or as a double coupling for 15.2 kNTightening torque of the flanged nuts: 50 Nm 1920gr, FV

FVApplication: Standard couplings are used as a rigid connection between a scaffolding tube and a tube of a different diameter. The angle between the two tubes is 90 degrees. Reducing standard couplings are characterised by the fact that one side of the scaffolding clamp is optimised for the standard 48.3 mm tube, whilst the other side is designed for a different diameter. Material, properties and features: • Steel, drop-forged, hot-dip galvanised, robust design, ribbed • Metric thread or quick-connect thread (depending on batch) • Flanged nut and hammer-head screw, electro-galvanised or hot-dip galvanised (depending on the batch) Additional information and notes : • If you require larger quantities than those shown as ‘in stock’, please contact us; we can usually assist you • On request, we are also happy to offer further sizes for standard reducing couplings: SW 19 For pipe Ø 48x34 mm SW 19 For pipe Ø 48x38 mm SW 19 For pipe Ø 48x42 mm SW 19 For pipe Ø 48x60 mm SW 19 For pipe Ø 48x76 mm