Go to the home page
0 CHF 0.00*

Steel sheet pipe connectors 60.3 mm (2")

A grey, robust metal cross connector joins two pipes at a 90° angle; the upper pipe runs horizontally above the lower one. Secured with four M10x35 screws, it accommodates 101.6 mm and 48.3 mm pipes. The surface is slightly rough and reflective.
Cross clamp 76–60 mm, 2 1/2"–2", FV, 1155 g, screws 4 x M10x25
This cross-connector enables the connection of two pipes at a 90° angle. This angle is not adjustable.
Product number 90300103

CHF 22.25*
Hot-dip galvanised, split T-clamp from the Swissclamp series for 90-degree angles. For connecting pipes of different diameters (mixed sizes): handrail 60.3 mm, upright 42.4 mm. Holes for M10x70.
Split T-clamp 90°, hot-dip galvanised, 1x M10x70 screw, mixed sizes, 2" x 1 1/4" (60.3 mm x 42.4 mm)
Dimensions: Handrail: 60.3mmUpright: 42.4mm
Product number 90030173

CHF 8.65*
Two dark grey, crescent-shaped halves of a robust claw clamp, shown separately. Each has a rough surface, a round screw hole and rectangular interlocking teeth at the top to form a secure 90° pipe connection.
90° claw clamp 2" x 2" (60.3 mm x 60.3 mm)
FV, screw 1 x M12x85
Product number R3041/3

CHF 11.10*
Sturdy, galvanised metal corner clamp for a secure connection between two profiles/pipes at a 90° angle. Grey, slightly textured surface. Four round holes (two on each side) for M10x30 screws. Compact, solid.
90° elbow clamp, 2" x 2" (60.3 mm x 60.3 mm), FV, 4x M10x30 screws
Product number R3049

CHF 22.95*
Closed T-clamp made of matt grey, galvanised metal for 90-degree pipe connections. With two cylindrical sockets (60.3 mm and 42.4 mm) and three holes for M10 screws. Rough cast surface visible.
Closed 90° T-clamp, mixed sizes, 2" x 1¼" (60.3 mm x 42.4 mm), FV, screws 2xM10x40
Dimensions:Handrail: 60.3mmUpright: 42.4mm
Product number 90010133

CHF 11.25*
Grey metal bracket with a round clamp section at the bottom and two screws enclosing an opening. Above this, a flat, horizontal arm with two elongated slots for fastening. Matt finish, with slight signs of wear.
Sign T-clamp 70 mm, FV incl. 2 GV screws, material thickness 2.5 mm, 2"
Product number VS4022

CHF 6.75*
A grey, metallic pipe connector with two cylindrical openings arranged in parallel. A sturdy component made of galvanised steel, showing slight signs of wear or a rough surface. A screw hole is visible in the centre.
Double clamp, 2" x 2" (60.3 mm x 60.3 mm), FV, 1xM12x70 screw
Product number R3042

CHF 12.75*
Sturdy T-shaped clamp made of galvanised metal for 90° pipe connections. With a closed main opening and a cylindrical opening at a right angle. Two round fixing holes for screws. Light grey, slightly textured.
Closed 90° T-clamp 2" x 2" (60.3 mm x 60.3 mm), hot-dip galvanised, screws 2xM10x35
Product number R3075

CHF 13.45*
Grey, split metal T-clamp at a 90-degree angle. Two pipe mounting diameters: handrail 76.1 mm and upright 60.3 mm. Multiple holes for screw fixing. Rough, robust surface.
Split T-clamp 90°, mixed sizes, 2½" x 2" (76.1 mm x 60.3 mm)
FV, screw 1x M12x90;Dimensions: Handrail: 76.1 mmStanding rail: 60.3 mm
Product number R3033C

CHF 15.40*
Robust, hot-dip galvanised steel door hinge with a complex joint mechanism and several visible bolts and nuts. Matt grey finish with characteristic zinc texture, shown at a slight angle, with the material thickness and stability clearly visible.
Hot-dip galvanised steel door hinge 48.3 mm x 48.3 mm (1 1/2" x 1 1/2")
This item is available in various other sizes;please contact us by email if you require a different size.
Product number 90430023

CHF 72.50*
Grey, hot-dip galvanised 90° T-clamp for connecting two 60.3 mm x 60.3 mm pipes. Split, with drill holes at both ends for fixing with screws. Surface slightly textured, matt finish.
Split T-clamp 90° 2" x 2" (60.3 mm x 60.3 mm), hot-dip galvanised, 1x M12x90 screw
Product number 90030193

CHF 12.25*
A grey, metallic pipe connector with two cylindrical openings arranged in parallel. A sturdy component made of galvanised steel, showing slight signs of wear or a rough surface. A screw hole is visible in the centre.
Double clamp, mixed sizes 2" x 1½" (60.3 mm x 48.3 mm), FV, 1xM12x70 screw
Dimensions:Left strut: 60.3mmRight strut: 48.3mm
Product number 90230113

CHF 12.30*
Hot-dip galvanised double-T clamp at a 90-degree angle for connecting two pipes. Sturdy silver-grey metal with a slightly irregular surface and fixing holes on two opposite sides. Solid, for permanent installations.
Double-T clamp 90°, mixed sizes, 2 1/2" x 2" (76.1 mm x 60.3 mm)
FV, screws 2x M12x80;Dimensions: Handrail: 76.1 mmStanding rail: 60.3 mm
Product number R3064

CHF 20.55*
Hot-dip galvanised square cross clamp with 90° angle connection for pipes. Two crosswise clamping areas: larger for 60.3 mm, smaller for 48.3 mm. Two screw holes on each side, four in total. Light grey, slightly textured.
Square cross clamp 90° 2" x 2" (60.3 mm x 60.3 mm), hot-dip galvanised, 4x M10x25 screws
Product number 90070093

CHF 19.75*
Hot-dip galvanised double-T clamp at a 90-degree angle for connecting two pipes. Sturdy silver-grey metal with a slightly irregular surface and fixing holes on two opposite sides. Solid, for permanent installations.
Double T-clamp 90° 2" x 2" (60.3 mm x 60.3 mm), hot-dip galvanised, 2xM12x85 screws
Product number R3061

CHF 15.95*
Silver-coloured, closed T-clamp made of galvanised metal for 90-degree pipe connections. Two vertical, cylindrical openings: large for handrail (60.3 mm), small for upright (48.3 mm). 3 fixing holes visible.
Closed 90° T-clamp, mixed size 2" x 1½" (60.3 mm x 48.3 mm), FV, screws 2x M10x35;
Dimensions: Handrail: 60.3mmStem: 48.3mm
Product number R3074

CHF 12.30*
Metal C-shaped clamping ring, suitable for a 2-inch (60.3 mm) pipe. Each of the two flat ends, which enclose the pipe, has a round hole for an M10 screw for fastening. Matt, unpolished finish.
Clamping ring, 2" (60.3 mm), FV, 1 M10x40 screw
Product number R3079B

CHF 6.25*
Grey, metallic 90° corner clamp on a white background. Sturdy clamp for connecting two pipes: 60.3 mm handrail and 48.3 mm upright. With several holes for screws, rough galvanised finish.
90° corner clamp, mixed sizes 2" x 1½" (60.3 mm x 48.3 mm)
Only 1 item left in stockMinimum order quantity 10 pieces if requiredFV, screws 4xM10x30; Dimensions:Handrail: 60.3mmStem: 48.3mm
Product number 90020093

CHF 15.00*
Hot-dip galvanised metal fixing plate with a tube fixed vertically in a sleeve. Elongated screw holes on both sides for mounting. Lying flat on a light grey background. Rough, industrial metal surface.
Mounting plate, 2" (60.3 mm), hot-dip galvanised, 760 g, 1x M10x30 screw
Product number 91460063

CHF 22.40*
Sturdy 90° metal angle clamp for securing pipes or rods. Grey clamp with an open, round opening and a small drill hole for secure screw fastening. Ideal for Swissclamp systems.
90° angle clamp 2" x 2" (60.3 mm x 60.3 mm)
F V, 1x M10x25 screw
Product number R3014

CHF 20.05*
Hot-dip galvanised double-T clamp at a 90-degree angle for connecting two pipes. Sturdy silver-grey metal with a slightly irregular surface and fixing holes on two opposite sides. Solid, for permanent installations.
Double-T clamp 90°, mixed sizes, 2" x 1 1/4" (60.3 mm x 42.4 mm), hot-dip galvanised, screws 2x M10x65
Vertical: 60.3 mm (2")Handrail: 42.4 mm (1 1/4")
Product number 90080113

CHF 13.45*
Hot-dip galvanised cross clamp in mixed sizes, consisting of two C-shaped metal clamp halves stacked one on top of the other, each with a hole at the ends for screwing. For the secure connection of 60.3 mm and 42.4 mm pipes.
Cross clamp, mixed sizes, 2" x 1¼" (60.3 mm x 42.4 mm), hot-dip galvanised,
Screws 2x M10x30, 2x M10x40;Dimensions:Upper clamp: 60.3 mmLower clamp: 42.4mm
Product number 90300063

CHF 19.45*
Hot-dip galvanised double-T clamp at a 90-degree angle for connecting two pipes. Sturdy silver-grey metal with a slightly irregular surface and fixing holes on two opposite sides. Solid, for permanent installations.
Double-T clamp 90°, mixed sizes, 2" x 1½" (60.3 mm x 48.3 mm)
FV, screws 2xM12x75; Dimensions: Handrail: 48.3mmStanding rail: 60.3 mm
Product number 90080123

CHF 14.25*
Grey, split metal T-clamp for 90° pipe connections, suitable for two pipes of different sizes. Sturdy, rough surface, multiple holes for screw fixing (one large, one small). For handrails and uprights, e.g. balustrades.
Split T-clamp 90°, mixed size, 2" x 1½" (60.3 mm x 48.3 mm), FV, screw 1xM12x75;
Dimensions: Handrail: 60.3mmStem: 48.3mm
Product number 90030183

CHF 11.40*
Swiss Specialist Retail

Swiss Specialist Retail

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

Secure payment

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...
Loading…
Loading the web debug toolbar…
Attempt #