Go to the home page
0 CHF 0.00*

Galvanised cast steel pipe connectors, 48.3 mm (1½")

Adjustable angle joint consisting of two connected parts: at the front, a silver-grey connector for a horizontal and a vertical blue tube; at the rear, a white extension. All tubes are secured with Allen screws, allowing for flexible angle adjustment.
Angle joint, adjustable 1 pair = 2 pieces 48.3 mm (1½”)
ALWAYS 2 PARTS MAKE ONE CONNECTOR! ENTER DOUBLE THE QUANTITY
Product number 608049E

CHF 12.20*
Grey metal articulated foot holder with a rectangular mounting plate and two drill holes for secure wall or floor mounting. An eyelet with a hole in the centre serves as a movable pivot point. Matt, textured finish.
Articulated foot bracket (Unimass)
For fixing structures to walls or floors, usually in conjunction with Type 42.
Product number 608050

CHF 7.40*
A grey articulated base enclosing a blue rod, positioned diagonally on a white background. It consists of a cylindrical holder and a flat, rectangular mounting plate with two drill holes, connected by a hinge.
Articulated base 48.3 mm (1½”), comprising 1 x 608050 and 1 x 608042E, incl. 1 M10x35 screw
consisting of 1 x 608050 and 1 x 608042EUsed for angled wall mounting or as a support for a support post.
Product number 608051E

CHF 16.80*
Grey, galvanised pipe connector with a triangular wall flange. Three drill holes for mounting and two Allen screws for securely fixing a vertical blue pipe. For posts Ø 48.3 mm.
Wall bracket, triangular flange 48.3 mm (1½”)
Side-mounted pipe connector for vertical posts. The support does not fit through the pipe connector.
Product number 608053E

CHF 31.30*
Grey, cylindrical cast iron street base with a round top plate. Blue post in the base. Ground sleeve pipe connector with side brackets for concrete anchoring and an opening for an adjusting screw to secure the 48.3 mm post tube.
Street base 48.3 mm (1½”)
A ground sleeve pipe connector in concrete for securing the support pipe. This allows posts to be inserted and held in place with a locking set screw.
Product number 608054E

CHF 53.50*
A silver-coloured, cylindrical eyelet with a rough surface, clamped firmly around a vertical, smooth, shiny blue tube. On the left, a flat single tab with a circular hole protrudes. Tube connector for panel mounting.
Eyelet section with single tab 48.3 mm (1½”)
Pipe connector for panel mounting.
Product number 608055E

CHF 8.30*
Grey pipe clamp with double bracket: secures a blue pipe via a hex screw. Two flat brackets, each with a mounting hole.
Eyelet section with double tab 48.3 mm (1½”)
Panel mounting tube connector with two eyelets; also used for locking gates.
Product number 608056E

CHF 12.80*
A solid grey metal retaining ring clamps around a vertical blue tube at the centre. On the side is a clearly visible hexagon bolt for secure fastening to the tube. The ring increases friction and prevents slipping.
Adjustment ring, retaining ring 48.3 mm (1½”)
Support tube connector for increasing the sliding resistance of heavily loaded tube connectors.
Product number 608060E

CHF 3.80*
A silver-coloured adjustment ring with a sturdy, right-facing hook is clamped centrally around a vertical blue tube. The tube connector is used to securely attach chains or similar items to tubes and has a rough metal surface.
Adjustable ring with hook 48.3 mm (1½”)
Pipe connector for chain fastenings.
Product number 608061E

CHF 7.00*
A grey, sturdy adjustable ring eye pipe connector firmly attached to a blue pipe. It wraps around the pipe; a visible screw secures it in place. On the left, an open eyelet for attaching further elements. The metal has a slightly rough finish.
Adjustment ring diameter, 48.3 mm (1½”)
Internal hinge pipe connector, for Type 63.
Product number 608062E

CHF 6.00*
A grey, sturdy adjustment ring pin, a pipe connector, is clamped around a vertical blue pipe. The external hinge pipe connector has a cylindrical rod protruding upwards and a fixing screw on the side to tighten it.
Adjustable ring pin, 48.3 mm (1½”)
External hinge pipe connector, for use in combination with Type 62
Product number 608063E

CHF 7.90*
A sturdy silver metal spacer ring with a polished finish, clamped securely around a blue tube. A downward-curving hook is integrated at the bottom; it is sturdy and suitable for hanging. For tubes with a diameter of 26.9 mm (¾ inch).
Adjustable ring with hook 48.3 mm (1½”)
Similar to tube connector Type 61, particularly suitable for the construction of coat stands and similar items.
Product number 608064E

CHF 7.00*
A silver, U-shaped grille bracket connects a dark blue grille to a round, blue metal post. The bracket encircles the post and is securely fastened to the grille with a screw.
Mesh holder, single 48.3 mm (1½”)
Single-sided wire mesh clamp
Product number 608070E

CHF 3.50*
A galvanised double mesh holder, a double-sided wire mesh clamp, is mounted centrally on a vertical blue post. It secures two dark wire meshes on both sides and is fastened with two screws.
Mesh holder, double, 48.3 mm (1½”)
Double-sided wire mesh clamp
Product number 608071E

CHF 4.00*
Silver-coloured L-shaped pipe connector that joins two blue pipes at a 90-degree angle. The metal elbow has a rough surface and several hex socket screws for securing. Three openings.
Eaves bend 48.3 mm (1½”)
This pipe connector is required for roof structures, usually in combination with Type 91E.
Product number 608085E

CHF 33.90*
Grey, cross-shaped metal pipe connector, connects four blue pipes at a 90° angle. The pipes fit securely into the openings and are secured with hexagon head screws. For stabilising structures, e.g. eaves top piece.
Eaves cap 48.3 mm (1½”)
This pipe connector is required for roof structures, usually in combination with Type 85E.
Product number 608091E

CHF 24.25*
Silver metal elbow connector, connects two blue tubes at a variable angle (approx. 45°). Smooth, robust, slightly textured. Allen screws at both ends for securing the tubes. Often used as an end stop for handrails/railings.
Elbow 40°–70° variable. 48.3 mm (1½”)
Elbow connector as an end stop for the upper railing with a variable angle of 40° to 70°. Most commonly used for stair railings.
Product number 608123E

CHF 29.50*
Sturdy, silver-coloured elbow connector made of galvanised metal, connects two blue tubes at a variable angle. Two hexagon head screws at the top for securing. Ideal for handrails/vertical supports, 42.4 mm (1¼”) tube.
Curve 15°–60° variable 48.3 mm (1½”)
Elbow 15° - 60° variable. Elbow connector as an end stop for the top rail with a variable angle of 15° to 60°. Most commonly used for vertical supports on staircases.
Product number 608124E

CHF 17.20*
Silver-grey, adjustable metal elbow connector, connects two blue tubes at an adjustable angle. Sturdy elbow with pivot point and fixing screws. Adjustable from 75° to 210°, for 33.7 mm (1”) tubes.
Elbow, adjustable. Variable elbow connector. 48.3 mm (1½”)
This connector can be used as a corner with angles ranging from a minimum of 75 degrees to a maximum of 210 degrees.
Product number 608125E

CHF 25.40*
A silver metal crosspiece connects two blue pipes; one runs vertically, the other diagonally at a 45-degree angle. The clamp is secured with screws that hold the pipes firmly in place and allow for a slope.
Cross piece for 45° slope, 48.3 mm (1½”)
Connecting clamp between the central rail and the rail posts for sloping rails with a fixed angle of up to 45°
Product number 608126E

CHF 29.80*
Galvanised, extra-heavy-duty wall bracket for pipes with a blue, vertical post. Two hex socket screws secure the pipe in the cylindrical clamp. Flat brackets with round holes for fixing.
Horizontal wall bracket, extra heavy-duty 48.3 mm (1½”)
Horizontal wall bracket, extra heavy-duty. Extra heavy-duty pipe connection corner bracket for vertical posts. This clamp is not suitable for feeding pipes through. Designed for manual fixing of safety railings and balustrades to walls, parapets, stairs and slopes with flat mounting.
Product number 608146E

CHF 32.40*
Extra-heavy, galvanised step edge footplate for fixing with a blue, vertical tube in the central clamping area. Rectangular base with 2 fixing holes, side flanges each with 2 slotted holes. Tube with 2 hex socket screws.
Trittrand base plate 48.3 mm (1½”)
Extra-heavy base plate for fixing to a step. Most commonly used on roofs.
Product number 608147E

CHF 47.30*
An open cross-piece made of grey metal connects two blue pipes. The upper pipe runs diagonally through the upper opening, whilst the lower pipe lies horizontally beneath it and is held in place by the lower clamp. A clamping screw is visible.
Open cross piece with insert 48.3 mm (1½”)
Open cross piece in which the crossbar is inserted into the insert and then tightened.
Product number 608201E

CHF 24.00*
A silver-coloured cross-connector (cross-piece) connects two blue tubes at a 90-degree angle: one vertically, one horizontally. Secured with hex socket screws, ideal for stable tube junctions.
90° cross-piece, combination size 60.3 mm (2”) – 48.3 mm (1½”)
Same pipe connector as Type 28, but with this pipe connector you can assemble structures using two different pipe diameters.
Product number 608028FE

CHF 17.30*
Swiss Specialist Retail

Swiss Specialist Retail

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

Secure payment

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...
Loading…
Loading the web debug toolbar…
Attempt #