Galvanised pipe fittings Ø 48.3 mm

Grey metal T-piece for 21.3 mm pipes connects two blue pipes. One pipe runs horizontally through the upper opening, the other vertically downwards. Two hexagon head screws secure the pipes in the connector.

Short T-piece, combined dimensions: horizontal 42.4 mm (1¼") – vertical 48.3 mm (1½")

Same as Type 2, but this version is used to connect pipes of different diameters.

Product number 608002DE

CHF 11.70*

Silver-coloured T-pipe connector, connects two blue pipes at a 90-degree angle: one pipe runs horizontally through the top of the connector, the second runs vertically downwards from the centre. Two Allen screws at the front for securing.

Short T-piece 48.3 mm (1½”)

For creating a vertical connection between two pipes. Upper pipe connector for straight and horizontal railing posts. This pipe connector cannot be used to connect a horizontal pipe within the pipe connector.

Product number 608002E

CHF 10.90*

Short T-piece, combination dimensions: horizontal 48.3 mm (1½”) – vertical 42.4 mm (1¼”)

Same as Type 2, but this version is used to connect pipes of different diameters.

Product number 608002ED

CHF 10.90*

Silver-grey T-piece connects two blue pipes: horizontally at the top, vertically downwards at the bottom. Adjustable angle, secured by two visible Allen screws. Surface of the cast piece is slightly textured.

T-piece, short, variable angle 0°–11°, 48.3 mm (1½”)

Same pipe connector as Type 2, but with a variable angle of 0°–11°.

Product number 608002SE

CHF 14.70*

A short, silver metal T-piece with a rough surface, connecting two blue pipes at a 45-degree angle. The two pipes are each secured to the fitting by a hexagon head screw, with one running vertically and the other diagonally.

T-piece, short 45° 48.3 mm (1½”)

Creates a connection between two pipes at a 45° angle.

Product number 608003E

CHF 17.90*

Silver-coloured T-pipe connector joins three blue pipes. Two run horizontally and one vertically downwards, creating a sturdy T-connection. Each connection is secured with an Allen screw.

T-piece, long 48.3 mm (1½”)

Similar to Type 02. This pipe connector can be used when a connection point is required in a horizontal pipe.

Product number 608004E

CHF 16.00*

Grey T-piece pipe connector joins three blue pipes: two horizontally (the right-hand one angled slightly downwards) and one vertically in the centre. Three hex socket screws secure the pipes. Angle 0 to 11 degrees.

T-piece, long. Variable angle 0°–11° 48.3 mm (1½”)

Same pipe connector as Type 4, but with a variable angle of 0°–11°.

Product number 608004SE

CHF 29.10*

Galvanised T-piece, permanently mounted on a blue tube, with an open round socket facing left and a side-mounted Allen screw for securing. Surface of the swivel tube connector is rough, with a matt finish. Insert for flexible tube constructions.

Internal rotating T-piece 48.3 mm (1½”)

Insert for use in the sockets of other pipe connectors, suitable for the construction of adjustable stair railings, brackets and similar applications.

Product number 608005E

CHF 15.50*

Sturdy, silver-coloured elbow connector joins two blue tubes (60.3 mm/2 inches) at a 90° angle. Visible matt, rough cast surface; one Allen screw each for secure fastening to railings.

90° elbow 48.3 mm (1½”)

Elbow connector for use as an end pipe connector for the upper railing element.

Product number 608006E

CHF 14.20*

Sturdy, silver-grey 90-degree elbow pipe connector, connecting two blue pipes: one horizontally to the left, the other vertically downwards. Two hex socket screws visible for securing. Slightly textured surface.

90° elbow, variable angle 0°–11°, 48.3 mm (1½”)

Same pipe connector as Type 6, but with a variable angle of 0°–11°.

Product number 608006SE

CHF 17.90*

Sturdy, silver-coloured angle connector with a rough cast finish, connecting two blue tubes: one pointing vertically upwards, the other diagonally downwards to the right. Adjustable angle, two Allen screws for fixing.

T-piece, short. Adjustable 30°–60° 48.3 mm (1½”)

This adjustable angle connector is used to join tubes at angles between 45° and 60°. Suitable for diagonal connections, struts and an angled handrail connection to vertical posts on staircases.

Product number 608007E

CHF 19.60*

A cylindrical, silver-grey metal extension piece with a rough, galvanised surface connects two vertical blue tubes. The fitting encircles them and is secured at the top and bottom with two hexagon bolts on each side.

Extension piece, external diameter 48.3 mm (1½”)

Connecting clamp for pipes of the same diameter. Not suitable for heavy vertical loads.

Product number 608008E

CHF 11.70*

A silver-grey, rough-textured tube connector with a visible hexagon socket screw, clamped tightly around a smooth, matt blue tube. It serves as a flush extension of two identical tubes for secure fastening.

Extension piece, internal 48.3 mm (1½”)

A streamlined, flush connection between two tubes of the same size. The wall thickness must be 3.2 mm. Do not apply direct load to this connection.

Product number 608009E

CHF 11.70*

Round base plate made of galvanised metal, which encloses a blue tube at the top. An Allen screw secures the tube in the connector. The plate is silver-grey with a rough metallic texture. For fixing the position.

Base plate, round 48.3 mm (1½”)

This tube connector is used in structures where positional fixing is required. Do not use as a base flange to support guardrails or similar systems.

Product number 608010E

CHF 17.20*

A square base plate made of silver, textured metal, which holds a blue tube vertically. A hexagon bolt secures the tube at the side within the through-type connector. Two round holes on the base are provided for fixing.

Base plate, square, full-length 48.3 mm (1½”)

This tube connector is used in structures where positional fixing is required. Do not use as a base flange to support guardrails or similar systems.

Product number 608011E

CHF 15.90*

Sturdy oval base plate made of grey metal supports a blue vertical post. With two visible fixing holes. Cylindrical tube connector reinforced with wide ribs, secures the post with two hexagon socket screws.

Base plate, oval 48.3 mm (1½”)

Strong base plate for supporting vertical posts. Vertical wide ribs with two adjusting screws increase the strength of the tube connector. The fixing holes in the base flange should be appropriate for the load applied.

Product number 608012E

CHF 23.50*

A grey, metallic ceiling bracket for railings, shown at an angle from the side, with a blue tube inserted. This robust component features two Allen screws for secure fastening and is designed for angles between 11 and 29 degrees.

Base plate, oval, variable angle 0°–11°, 48.3 mm (1½”)

The same pipe connector as Type 12, but with a variable angle of 0°–11°.

Product number 608012SE

CHF 29.40*

Grey, galvanised wall bracket for vertical posts. L-shaped fitting with a cylindrical opening, containing a blue tube. Two Allen screws for fixing. Mounting plate with two holes for walls, parapets or steps, ideal for safety railings.

Horizontal wall bracket 48.3 mm (1½”)

Side-mount clamp for vertical posts. The tube does not fit through this clamp. Designed for manual fixing of safety railings and balustrades to walls, parapets, steps and ramps.

Product number 608013E

CHF 34.00*

Sturdy grey metal wall bracket for vertical posts. Side-mount clamp with a cylindrical opening for a blue tube, flat mounting plate with three screw holes. Two hex socket screws secure the post. Rough metal.

Vertical wall bracket 48.3 mm (1½”)

Side-mount clamp for vertical posts. The tube does not fit through this clamp. Designed for manual fixing of safety railings and balustrades to walls, parapets, steps and ramps.

Product number 608014E

CHF 34.20*

Galvanised three-way corner joint connects three blue tubes at a 90-degree angle: two horizontally, one vertically downwards. Sturdy corner clamp with visible Allen screws for a stable construction, ideal for railing corner joints.

Three-way corner piece 90° 48.3 mm (1½”)

Corner connector (90°) for upper railing corner pieces and all other rectangular systems.

Product number 608018E

CHF 19.80*

Grey metal corner joint, connecting four blue tubes at a 90-degree angle. One tube runs vertically through the centre, with three others attached horizontally at the sides. Black fixing screws are visible at the top.

90° corner joint, straight-through, 48.3 mm (1½”)

Used as a counterpart to Type 18; the pipe fits through the connector.

Product number 608020E

CHF 16.40*

A grey, hinged metal angle clamp connects three blue tubes at a 90-degree angle. One vertical tube runs through the central opening, whilst two horizontal tubes are inserted at the sides and secured with hexagon socket screws.

Hinged 90° elbow joint 48.3 mm (1½”)

Hinged 90° elbow joint, with the vertical pipe running through the clamp.

Product number 608020OE

CHF 29.10*

Sturdy, silver-coloured metal cross-piece for a 90° connection of four blue tubes. The connecting clamp guides the tubes horizontally and vertically, with three visible hexagon socket screws for secure fastening. Ideal for railings.

Cross piece, solid 48.3 mm (1½”)

90° connecting clamp between the central element and the post on railings.

Product number 608022E

CHF 16.60*

A grey, open cross-piece connects two blue pipes at a right angle. The metal element encloses the vertical pipe and secures a horizontal pipe with two visible Allen screws. A hinge indicates that it can be folded open for assembly.

Open (hinged) cross-piece, 48.3 mm (1½") on one side

Fold-out elbow joint (90°), with the vertical pipe running through the clamp.

Product number 608022OE

CHF 29.10*

Pipe connectors

Pipe clamps

Round steel brackets

Scaffolding clamps

Accessories

Pipes

Inspiration

Galvanised cast steel pipe connectors, 48.3 mm (1½")

Swiss Specialist Retail

Secure payment

TÜV tested

Recommended by architects & building designers