Aluminium pipe connectors 40 mm

Cross connector 40mm
The tube connector joins two tube ends and one continuous tube at a 90° angle. By clamping two half-shells together, two tube ends and one continuous tube are joined to form a cross. The tubes do not need to be drilled.
Product number 50-40

CHF 23.90*
Aluminium support pipe 40mm
The pipe connector joins a pipe parallel to the mounting surface. The two threaded pins clamp the end of the pipe within the pipe connector. There is no need to drill the pipe.
Product number 11a-40

CHF 33.40*
Cross connector aluminium 40mm, angle 55°/35°
Product number 50a-40-Wa55-35

CHF 32.00*
Aluminium T-connector 40 mm, 55° angle, 35° angle
Product number 71a-40-Wa55-35

CHF 31.20*
Tube connector Aluminium 40mm
The tube connector joins two tubes at a 45° and a 135° angle. By clamping two half-shells together, one end of a tube and a continuous tube are joined. There is no need to drill the tubes.
Product number 40a-40

CHF 29.60*
Aluminium elbow 40mm 30°/60°/150°
Product number 32-40-Wa30-60-150

CHF 28.00*
Aluminium T-connector 40 mm, 30°/60°
Product number 71a-40-Wa30-60

CHF 39.40*
Floor and ceiling brackets aluminium 40 mm
The pipe connector attaches a pipe vertically to a floor, ceiling or wall surface. The end of the pipe is clamped into the slotted pipe holder in the pipe connector. The end of the pipe is drilled twice with a Ø 9.0 mm drill bit.
Product number 10-40

CHF 23.60*
swivel bearing Aluminium 40mm
Product number 76-40

CHF 110.90*
Aluminium angle bracket 40mm 45°/45°/135°
Product number 32-40-Wa45-45-135

CHF 26.00*
Disc holder aluminium 40mm
The pipe connector is used as a washer holder. The washers are secured with plastic screws. The pipe connector is screwed onto the pipe or riveted in place. These fasteners are not included in the scope of delivery.
Product number 19-40

CHF 15.80*
Double clamp Aluminium 40mm
The pipe connector joins two pipes in parallel. By clamping two half-shells together, two continuous pipes with a centre-to-centre distance of 96mm are connected in parallel. The pipes do not need to be drilled.
Product number 73-40

CHF 22.10*
Panel holder Aluminium 40mm
The pipe connector is used as a panel holder. Thanks to the slotted pipe mount, this pipe connector can be fixed at any position along the pipe. The pipes do not need to be drilled.
Product number 21-40

CHF 27.70*
Aluminium cross connector 40mm female/male 45° 45°
Product number 50a-40-Wa45-45

CHF 32.00*
T-connector long 40 mm
This pipe connector can be used when a connection point is required in a horizontal pipe.
Product number BR2064b

CHF 24.10*
Tube connector Aluminium 40mm
The tube connector joins two tubes at a 45° and a 135° angle. By clamping two half-shells together, a tube end and a through-tube are connected. The tubes are each drilled twice with Ø 9.0 mm hole.
Product number 40-40

CHF 36.10*
Panel holder Aluminium 40mm
The pipe connector secures a pipe parallel to the mounting surface. The pipe connector is clamped to the pipe by clamping two half-shells together. There is no need to drill the pipe.
Product number 38a-40

CHF 17.80*
Aluminium support tube 40 mm
The pipe connector joins a pipe parallel to the screw-on surface. The slotted pipe holder clamps the pipe end within the pipe connector. The pipe end is drilled twice with Ø 9.0 mm hole.
Product number 11-40

CHF 34.60*
Aluminium support centre 40mm
The tube connector joins a continuous tube in parallel to the mounting surface. The slotted tube holder clamps the end of the tube inside the connector. There is no need to drill the tube.
Product number 15-40

CHF 19.80*
Aluminium bracket floor 40mm
Product number 1411-40

CHF 30.50*
Aluminium elbow 90° 40mm
The pipe connector joins two pipes at a 90° angle. By clamping two half-shells together, the two pipe ends are joined to form a 90° branch. The two pipe ends are drilled to a diameter of 9.0 mm.
Product number 30-40

CHF 20.50*
drilling guide 40 mm
Product number 80-40

CHF 88.60*
Aluminium elbow 45° 40mm
The pipe connector joins two pipes at a 45° angle. By clamping two half-shells together, the ends of two pipes are joined to form a 45° branch. The pipes do not need to be drilled.
Product number 31-4045

CHF 18.90*
swivel bearing Aluminium 40mm
Product number 75-40

CHF 110.90*
Swiss Specialist Retail

Swiss Specialist Retail

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

Secure payment

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

Loading...
Files are being uploaded, please wait...
Loading…
Loading the web debug toolbar…
Attempt #