Go to the home page
0 CHF 0.00*

Galvanised cast steel pipe connectors 33.7 mm (1")

Grey, cylindrical cast iron street base with a round top plate. Blue post in the base. Ground sleeve pipe connector with side brackets for concrete anchoring and an opening for an adjusting screw to secure the 48.3 mm post tube.
Street base 33.7 mm (1”)
A ground sleeve pipe connector in concrete for securing the support pipe. This allows posts to be inserted and held in place with a locking set screw.
Product number 608054C

CHF 55.40*
A silver-coloured, cylindrical eyelet with a rough surface, clamped firmly around a vertical, smooth, shiny blue tube. On the left, a flat single tab with a circular hole protrudes. Tube connector for panel mounting.
Eyelet section with single tab, 33.7 mm (1”)
Pipe connector for panel mounting.
Product number 608055C

CHF 5.70*
Grey pipe clamp with double bracket: secures a blue pipe via a hex screw. Two flat brackets, each with a mounting hole.
Eyelet section with double tab, 33.7 mm (1”)
Panel mounting tube connector with two eyelets, also used for locking gates.
Product number 608056C

CHF 7.70*
A solid grey metal retaining ring clamps around a vertical blue tube at the centre. On the side is a clearly visible hexagon bolt for secure fastening to the tube. The ring increases friction and prevents slipping.
Adjustment ring, retaining ring, 33.7 mm (1”)
Support tube connector for increasing the sliding resistance of heavily loaded tube connectors.
Product number 608060C

CHF 3.00*
A silver-coloured adjustment ring with a sturdy, right-facing hook is clamped centrally around a vertical blue tube. The tube connector is used to securely attach chains or similar items to tubes and has a rough metal surface.
Adjustable ring with hook, 33.7 mm (1”)
Pipe connector for chain fastenings.
Product number 608061C

CHF 5.90*
A grey, sturdy adjustable ring eye pipe connector firmly attached to a blue pipe. It wraps around the pipe; a visible screw secures it in place. On the left, an open eyelet for attaching further elements. The metal has a slightly rough finish.
Adjustment ring diameter, 33.7 mm (1”)
Internal hinge pipe connector for Type 63.
Product number 608062C

CHF 5.00*
A grey, sturdy adjustment ring pin, a pipe connector, is clamped around a vertical blue pipe. The external hinge pipe connector has a cylindrical rod protruding upwards and a fixing screw on the side to tighten it.
Adjustment ring pin, 33.7 mm (1”)
External hinge pipe connector, for use in combination with Type 62.
Product number 608063C

CHF 6.90*
A sturdy silver metal spacer ring with a polished finish, clamped securely around a blue tube. A downward-curving hook is integrated at the bottom; it is sturdy and suitable for hanging. For tubes with a diameter of 26.9 mm (¾ inch).
Adjustable ring with hook 33.7 mm (1”)
Similar to tube connector Type 61, particularly suitable for the construction of coat stands and similar items.
Product number 608064C

CHF 5.90*
A silver, U-shaped grille bracket connects a dark blue grille to a round, blue metal post. The bracket encircles the post and is securely fastened to the grille with a screw.
Mesh holder, single 33.7 mm (1”)
Single-sided wire mesh clamp
Product number 608070C

CHF 2.70*
A galvanised double mesh holder, a double-sided wire mesh clamp, is mounted centrally on a vertical blue post. It secures two dark wire meshes on both sides and is fastened with two screws.
Mesh holder, double, 33.7 mm (1”)
Double-sided wire mesh clamp
Product number 608071C

CHF 3.80*
A silver-coloured cross-connector (cross-piece) connects two blue tubes at a 90-degree angle: one vertically, one horizontally. Secured with hex socket screws, ideal for stable tube junctions.
90° cross piece, combination size 42.4 mm (1¼”) – 33.7 mm (1”)
Same pipe connector as Type 28, but with this pipe connector you can assemble structures using two different pipe diameters.
Product number 608028DC

CHF 10.50*
A silver-coloured cross-connector (cross-piece) connects two blue tubes at a 90-degree angle: one vertically, one horizontally. Secured with hex socket screws, ideal for stable tube junctions.
90° cross-piece, combination size 48.3 mm (1½”) – 33.7 mm (1”)
Same pipe connector as Type 28, but with this pipe connector you can assemble structures using two different pipe diameters.
Product number 608028EC

CHF 10.80*
Grey metal articulated foot holder with a rectangular mounting plate and two drill holes for secure wall or floor mounting. An eyelet with a hole in the centre serves as a movable pivot point. Matt, textured finish.
Articulated foot bracket (Unimass)
For fixing structures to walls or floors, usually in conjunction with Type 42.
Product number 608050

CHF 7.40*
Galvanised, extra-heavy-duty wall bracket for pipes with a blue, vertical post. Two hex socket screws secure the pipe in the cylindrical clamp. Flat brackets with round holes for fixing.
Horizontal wall bracket, extra heavy-duty 33.7 mm (1”)
Extra-heavy-duty pipe connection elbow for vertical posts. This clamp is not suitable for feeding pipes through. Designed for manual fixing of safety railings and balustrades to walls, parapets, stairs and slopes with a flat mounting.
Product number 608146C

CHF 24.10*
Sturdy, silver-coloured elbow connector made of galvanised metal, connects two blue tubes at a variable angle. Two hexagon head screws at the top for securing. Ideal for handrails/vertical supports, 42.4 mm (1¼”) tube.
Elbow 15°–60° variable 33.7 mm (1”)
Elbow 15° - 60° variable. Elbow connector as an end stop for the top rail with a variable angle of 15° to 60°. Most commonly used for vertical supports on staircases.
Product number 608124C

CHF 11.30*
A grey, galvanised angle joint connects two black pipes at an angle. It has a robust, rough surface and side screws for secure fastening. Allows for angles ranging from 45° to 270° for stairs and railings.
Angle joint 45°–270°, 33mm, 1"
890g, galvanised. For stairs and railings. The angle can only be fixed to a limited extent.
Product number SGC153-2

CHF 27.90*
Sturdy, galvanised metal flag mount for a blue pole at a 45-degree angle. With a square mounting plate, four fixing holes and two adjusting screws for secure locking of the flagpole.
Flag mount 33.7 mm (1”)
New to our range are the flag mounts. These mounts create a 45-degree angle so that the flagpoles protrude from the wall, allowing your flags to fly freely.
Product number 6080FP1

CHF 17.40*
Silver-grey, adjustable metal elbow connector, connects two blue tubes at an adjustable angle. Sturdy elbow with pivot point and fixing screws. Adjustable from 75° to 210°, for 33.7 mm (1”) tubes.
Elbow, adjustable. Variable elbow connector. 33.7 mm (1”)
This connector can be used as a corner with angles ranging from a minimum of 75 degrees to a maximum of 210 degrees.
Product number 608125C

CHF 15.70*
Sturdy, silver flag mount made of galvanised metal, holds a blue flagpole at a 45° angle. With a flat mounting plate (4 screw holes) for wall mounting and a side-mounted Allen key for securing. For 33.7 mm pole diameter.
Flag bracket 33.7 mm (1”)
This bracket creates a 45-degree angle so that the flagpole protrudes from the wall, allowing your flags to fly freely.
Product number 6080FP2

CHF 26.20*
A transparent plastic bag filled with lots of grey plastic screw caps. Each cap has a flat, round top and a cylindrical insert. The grey caps are evenly distributed.
Plastic screw cap grey for B / C
25 pieces per bag
Product number 608078BC

CHF 14.70*
Silver-coloured, galvanised container clamp for securing a flagpole. Round opening approx. 60 mm, flat mounting plate with two screw holes for fitting to standard shipping containers. Allen screw for securing the tube.
Container clamp 60.3 mm (2”)
For flagpoles at the front of the containerPipe connector for attaching a flagpole to a container, for a pole with a diameter of Ø 60 mm. Design: Surface treatment: galvanised. Suitable only for standard 20-foot shipping containers. Type 5080C3400F Size 60.3 mm Weight 1.400 kg
Product number 6080C3400F

CHF 34.45*
Round, black plastic plug with a slightly textured, matt front. Sides with concentric grooves for a secure fit in thick-walled pipes or openings. For sealing pipe ends.
Plug, black plastic, 33.7 mm (1”), for thin-walled tubing (1.0–2.9 mm)
Plastic cap for sealing the end of the pipe.
Product number 608074C-L

CHF 2.70*
Polished stainless steel adjusting screw, shown from three angles. Cylindrical, with external thread and deep hex socket. 1/4-inch screw for pipe connectors, shown in side and top views.
Stainless steel adjusting screws for pipe connectors. 1/4” (for B / C )
Product number 608076BC

CHF 3.10*
A black, L-shaped Allen key for pipe connectors of sizes B and C lies on a white background. Below is a table showing the key types 608075A, 608075BC, 608075DEF, their corresponding sizes (A, B/C, D/E/F) and weights.
Allen key for pipe connectors For B / C
For sizes B / C (size B: 3/4" = 26.9 mm) (size C: 1" = 33.7 mm)You only need a simple Allen key to assemble our pipe connectors. Available in various inch sizes.
Product number 608075BC

CHF 7.35*
Swiss Specialist Retail

Swiss Specialist Retail

Here you will receive expert advice, customer-focused solutions and genuine specialist expertise. Reliable service is guaranteed, even after your purchase!
Your Swiss Expertise Team

Secure payment

Secure payment

You can pay by credit card, Maestro, Sofortüberweisung, Google Pay, Apple Pay, Twint and prepayment. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & building designers

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this serves as a guarantee of quality, expertise, and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...
Loading…
Loading the web debug toolbar…
Attempt #